|
|
|
|
| RSW-1002
|
Redundant Video Switch |
|
 |
| For Fail-Safe Redundant Video
Applications |
|
|
|
|
The RSW-1002 is a two input, single output automatic switch designed for
those applications where the loss of video is critical. Although not a fiber
optic system per se, the RSW-1002 may be used with any fiber optic system to
implement a redundant, fail-safe video transmission system.
The unit operates by accepting a main and backup video signal. Upon the loss
of either signal, the RSW-1002 will automatically switch to and provide the
remaining signal at it’s common output. LEDs are provided to continuous
indicate the presence of video signals in each channel as well as the
presence of operating power making system troubleshooting simple
|
| |
| Specifications |
|
|
Important Features |
| Video Bandwidth (min) |
10 MHz (+0,-3dB) |
|
· DC to 100MHz
Video |
| Input/Output Impedance |
75 ohms |
|
Bandwidth |
| Input/Output Level |
1 volt pp |
|
· NTSC & PAL
compatible |
| Signal/Noise Ratio* |
60 dB minimum |
|
· Signal & Power
Indicators |
| Differential Gain* |
0.5% maximum |
|
|
| Differential Phase* |
0.5º maximum |
|
|
| Compatibility |
NTSC, PAL, SECAM |
|
|
| Signal Connectors |
BNC |
|
|
| Power Requirements |
11-24 VAC/DC @150ma |
|
|
| Physical Size |
5.0” x 3.0 x 1.0"
127mm x 76mm x 25.4mm |
|
|
*Note all specifications are subject to change without notice
Copyright 2011
|
Fiber Optic Communications Systems 
