|
|
|
|
| TLPX-1201 /
TLLX-1201 |
Telephone Transmission For Bogen1 Intercom Systems |
|
|
| For adding fiber optics to
Intercom Systems |
|
|
|
|
The TLPX/TLLX-1201 system consists of the TLPX-1201 transmitter and
TLLX-1201 receiver. Both units provide a fiber optic interface between a
Bogen1 tone-type telephone and the Bogen Intercom System. All
functions including full duplex audio, dial tone, ringing and
connect/disconnect are supported. In addition to increasing your link
distances, Fiber optics provide immunity to RF noise & hum.
Standard phone compatibility is available with TLLX-1201 and TLPX-1001
combination.
Both multimode and single-mode versions are available and connections to and
from the telephone and telephone line are by means of standard modular
plugs. In addition, integral LEDs are provided on both units to continuously
indicate the presence of the off-hook condition as well as the presence of
operating power making system troubleshooting simple.
|
| |
| Specifications |
|
|
Important Features |
| Audio Bandwidth (min) |
300 Hz to 3000 Hz |
|
· Bogen1
Compatible |
| Input/Output Impedance |
75 ohms |
|
· Standard
phone |
| Input/Output Level |
1 volt pp |
|
compatibility with |
| Noise Level |
50 dB minimum |
|
TLPX-1001 |
| Signal Connectors |
RJ-11 |
|
· Signal & Power
Indicators |
| Optical Output Power |
-16 dBm (multimode),
-16 dBm (single-mode) |
|
· Multimode &
Single mode
Versions available |
| Optical Loss Budget |
0-10 dB (multimode),
0-10 dB (single-mode) |
|
· Single
model for stand
alone or
rack mount |
| Power Requirements |
11-24 VAC/DC @150ma |
|
·
Din Rail Mount Option |
| Physical Size |
5.0” x 3.0 x 1.0"
127mm x 76mm x 25.4mm |
|
|
*Notes; All specifications are subject to change without
notice
“POTS”
signifies “plain old telephone service”
1) BOGEN™ is a trademark of
BOGEN COMMUNICATIONS,
INC., and is used here to indicate
the electrical compatibility with their telephone
intercom products.
Copyright 2011
|
Fiber Optic Communications Systems 
