Litelink Home  Fiber Optic Communications Systems Home   Contact   Feedback   Map   Search

Products

Pdf Datasheet

Print Page

Email Page

User Manual

VADT/VADR-9004     4 Video, 8 Audio,
4 Data Tx
   
For Transmitting Multiple Video / Audio / Data Channels  

 


The VADT/VADR-9004 system consists of the VADT-9004 transmitter and VADR-9004 receiver. Both units utilize pure digital 10 bit encoded modulation to transmit 4 individual high quality video signals, 4 hi-fi stereo (or 8 mono) audio channels, and 4 data channels on a single fiber. Video signals are an in accordance with NTSC, PAL and SECAM specifications. Audio channels can be balanced or unbalanced. Data can be RS-232, RS-422 or TTL as specified by the user

Both multi-mode and single-mode versions are available and installation is adjustment free. In addition, indicators are provided on both units to continuously indicate the presence of video, audio and digital signals as well as the presence of operating power making system troubleshooting simple.
 
 
Video Channel (4) Important Features
Video Bandwidth (min)  8 MHz (+0,-3dB)    · 10 Bit Video, 24 Bit Audio
Input/Output Impedance  75 ohms  · Broadcast Quality
Input/Output Level  1 volt pp  · 10 Bit Digital Modulation
Signal/Noise Ratio*  67 dB minimum  · Signal & Power Indicators
Differential Gain*  0.5% maximum
Differential Phase*  0.5º maximum
Audio Channel (8)
Bandwidth 20 Hz to 20 KHz
Signal/Noise Ratio 90 dB minimum
THD < 0.05%
Input / Output Impedance 600 Ohms Balanced or Unbalanced
Data Channel (4)
Protocol RS-232, RS-422, or TTL
Data rate 1.5Mb/s maximum
General
Optical Output Power  -10 dBm (multimode),
 -15 dBm (single-mode)
   
Optical Loss Budget  0-12 dB (multimode),
 0-12 dB (single-mode)
   
Signal Connectors  BNC
Power Requirements  11-24 VAC/DC @150mA
Physical Size  5.0” x 3.0 x 1.0"
127mm x 76mm x 25.4mm
   

*Measured with 1Km of 8/10u single-mode fiber. 
*Note all specifications are subject to change without notice


Copyright 2011


Liteway, Inc. 

Voice: 1-516-931-2800

Email:  Contact Us