|
|
|
|
| VAT/VAR-1001
|
Video & Audio Transmission |
|
 |
| For Video and Audio
Applications Transmission |
|
|
|
|
The VAT/VAR-1001 system consists of the VAT-1001 transmitter and
VAR-1001 receiver. Both units utilize linear modulation and wide-band low
noise circuitry to transmit high quality video and two channels of audio signals in
accordance with NTSC, or PAL specifications. The unit will work with
both balanced or unbalance Audio signals.
Both multimode and single-mode versions are available and installation only
requires a simple one-minute adjustment to set the desired audio and video
output levels. In addition, integral indicators are provided on both units to
continuously indicate the presence of all signals as well as the presence of
operating |
| |
| Specifications* |
|
|
Important Features |
| Video Bandwidth (min) |
8 MHz (+0, -3dB) |
|
· 8 MHz Video
Bandwidth |
| Audio Bandwidth (min) |
15 KHz (+0,-3dB) |
|
· 15 KHz Audio
Bandwidth |
| Input / Output Impedance |
Video: 75 ohms
Audio: 600 ohms |
|
· Balanced or
Unbalanced
Inputs |
| Signal / Noise Ratio |
60 dB minimum |
|
· Signal & Power
Indicators |
| Differential Phase / Gain |
3.0º / 3.0 % maximum |
|
· Single
model for stand
alone or
rack mount |
| Stereo Separation |
60 dB |
|
·
Din Rail Mount Option |
| Optical Output Power |
-16 dBm (multimode),
-16 dBm (single-mode) |
|
|
| Optical Loss Budget |
0-13 dB (multimode),
0-13 dB (single-mode) |
|
|
| Signal Connectors |
Video: BNC
Audio: Terminal block |
|
|
| Power Requirements |
11-24 VAC/DC @150mA |
|
|
| Physical Size |
5.0” x 3.0 x 1.0"
127mm x 76mm x 25.4mm |
|
|
*Note all specifications are subject to change without notice
Copyright 2011
|
Fiber Optic Communications Systems 
