|
|
|
|
| VM-2004
|
1x4 Video DA |
|
|
|
For Video Distribution Applications |
|
|
|
|
The VM-2004 is a single input, quad output wide-band video distribution
amplifier designed for those applications where a single video source must
be routed to four separate locations. Although not a fiber optic system, the VM-2004 may be used with any fiber optic transmission system where
multiple video signals are required.
In addition to providing three separate outputs indicator are provided
to continuous indicate the presence of an input video signal, the loss of
the input signal and the presence of operating power making system
troubleshooting simple |
| |
| Specifications |
|
|
Important Features |
| Video Bandwidth (min) |
DC to 100 MHz (+0,-3cB) |
|
· 100 MHz Video
Bandwidth |
| Input/Output Impedance |
75 ohms |
|
· NTSC & PAL
compatible |
| Input/Output Level |
1 volt pp |
|
· Signal & Power
Indicators |
| Signal/Noise Ratio* |
75 dB minimum |
|
· Single
model for stand
alone or
rack mount |
| Differential Gain* |
0.5% maximum |
|
·
Din Rail Mount Option |
| Differential Phase* |
0.5º maximum |
|
|
| Compatibility |
NTSC, PAL |
|
|
| Indicators |
Power, Signal, Alarm |
|
|
| Signal Connectors |
BNC |
|
|
| Power Requirements |
11-24 VAC/DC @150mA |
|
|
| Physical Size |
5.0” x 3.0 x 1.0"
127mm x 76mm x 25.4mm |
|
|
*Measured with 1Km of 62.5u multimode fiber.
*Note all specifications are subject to change without notice
Copyright 2011
|
Fiber Optic Communications Systems 
